|
 |
 |
|
JMR Portable Punch and Dimple Die Kit
|
At last, a way to punch and dimple panels which are too large to fit into a press or are already welded in place. These portable dimple die kits from JMR Manufactuing allow you to punch holes and dimple both steel and aluminum. Especially useful for working on off road vehicles or jobsites where transporting a press is not practical.
Features / Specs:
- Easily portable
- 1.115", 1.362", 1.687", 1.937", and 2.375" cutter sizes included
- 10 Ton Hydraulic Cylinder
- Dimple Dies can also be used in a standard press
- Air / Hydraulic and Hand Pump options available
 Be the first to review this product!
|
Standard Hydraulic Kit
|
Air / Hydraulic Kit
|
|
|
Example Specs:
Starting Hole: 1.50"
Finished Hole: 1.584" (+.084")
Flare Height: 0.176" (from backside of material)
Flare Height: 0.25" (including material thickness)
Note: Material thickness will alter specs.
|
|
|
|
|
|
|
|
Van Sant Enterprises, Inc.
Hours: 7:30 - 5:30 CST Monday - Friday or 24 hr. Fax
Need Driving Instructions? Click Here for the Map
80 Truman Road | Pella, IA 50219
877-VAN-SANT | Phone 641-628-3860 | Fax 641-628-2614 | E-mail sales@vansantent.com |
|
|
|
|
