| Well Labor Day is behind us & for most of us that means that
fall is just around the corner. As much as I love the summer, the
off season means lots of time to get to work on projects, and that
is not all bad! If you are like me, you could probably use a few new
tools to outfit your shop.
This month we have some new tools for you & some lower prices
as well. We have added to our widely popular "Multitool" line up,
and we have also added a new tube and pipe drill fixture as well. On
top of the new products, we have been able to drop the prices on our
most popular digital level, and our Wilton Belt & Disc Sander
combos. So take a second & check out what we have!
| ---NEW Multitool Grinders--- |
 |
 Many fellow fabricators call these "The Most Versatile
& Most Important Tool in any Shop!"
We have now expanded our line to include all 5 belt
configurations, with more motor options then ever before. They
are available in 2"x36", 2"x48", 4"x36" and 4"x48" belt sizes.
These versatile machines will remove material up to 5 times
faster than with the equivalent grit grinding wheel. Belts can
change in seconds from grinding, to sanding, to deburring, to
polishing. Quality construction is backed by a 3-year
warranty.
Click
Here to Check Out These AWESOME Tools! »
|
| NEW Tube Drilling Jig |
|
 Accurate drilling can be done easily with this simple
tool. It makes hole drilling in round tube or pipe extremely
easy.
This jig will assist in drilling holes in tubing and pipe.
The angle flats hold the material firmly in place so holes can
be drilled without center-punching. Just set up the jig with
the drill bit properly aligned in the 118 degree lower vee,
and you are set to go!
See
the NEW Drill Jig here. »
|
| ---SAVE on Our Most Popular Digital
Level--- |
|
 No shop can be without this handy tool! This level is
accurate to 1/10th of a degree. It can also run for
approximately 400 hours on a single 9v battery.
The level will display degrees, slip %, and pitch
(in./ft.). It also features arrows to show the direction to
move towards level. The reading on the display can also be
locked. They even feature an audible indicator when you reach
level!
The SmartTool levels also work great with our aluminum
rails. Available in 8", 24", 48", & 72". The 8" fits
nicely around the smart tool. The 24", 48", & 72" rails
also feature bubble vials.
Click
Here to SAVE on SmartTools! »
|
| Save $100 or more on Wilton Belt & Disc
Combos! |
|
 These multipurpose combination belt grinder/disc
grinders are very easy to operate. Within a 115v platform,
they offer you fast, efficient grinding and finishing. They
are available in 2 models, for shop & industrial use.
These units are also backed by an excellent warranty from
Wilton, and are sure to become a highly used machine in any
fabrication shop.
Wilton
Combo Grinder Savings! »
| |
Trick
Tools will be at the 27th Annual Fall 4-Wheel Jamboree
Nationals! |
 |
| Trick Tools will be attending the Fall 4-Wheel Jamboree
Nationals, located at the Indiana State Fairgrounds. The 27th
annual event will be held September 19th, 20th, and 21st.
Located in the Performance Marketplace, we will be stocked
up with all of your favorite tools & machines. Many
machines will be set up for demonstration purposes, as well as
purchase.
The Jamboree features a Show-N-Shine, Stock & Modified
Tough Truck Competitions, as well as Monster Truck Drags &
Rides. The show will also feature a Burnout Competition, Mud
Drag Races, Rock Crawl Challenge, and a Team Ride & Drive
Obstacle Course.
Stop
by & See the Trick Tools Team!
|
|
