 |
Imperial
44F English Wheel Capabilities
•Mild steel capacity is 16 gauge, and aluminum capacity
is up to 3/16"
•Features can be rolled into the center of an 88"
panel
•Rigid cast iron frame provides a sturdy, vibration-free
platform for your job
•Frame will withstand pressures of matching forming
rolls to form hat, "Z" and lap sections
•Frame is shaped to facilitate clearance for panels
both upward and downward contours
•Screw lift assembly has a quick-release cam mechanism
that lowers the anvil yoke with a 90-degree rotation of
the control handle. When rotated back to operating position,
the original pressure setting is re-established
•Screw lift and upper anvil wheel rotate 90 degrees
for larger panels
•Anvil yoke is adjustable on both sides of the axle
support with thumb screws so the anvil wheels can be trued
with the upper wheel
Imperial
44F English Wheel Specifications
•Height: 78"
•Width: 55"
•Standard working height: 50"
•Base: 24" x 36"
•Throat: 44"
•Weight: approximately 1,850 lbs
•Upper wheel: 10" dia. x 3" wide 1045 steel
forging polished to a 63 surface finish
•Anvil wheels: six wheels made from 1045 alloy steel
as follows:
3" wide x 3" dia., radii: 2.375 R, 3.75 R, 6.00
R, 12.0 R, 24.00 R and Flat
|
