Jancy
Abrasive Tube Notcher
These high speed abrasive
tube coping machines from Jancy Engineering are fast and cost effective
methods to fit tubes together prior to welding. The high speed grinding
belt provides a smooth polished surface at any angle from 0 to 60°
in tubing from 3/4" up to 4.5" OD. There is a guarded belt surface
on top ideal for grinding or deburring. Belt life is generally around
100-200 copes per belt depending on material. Three mandrels of your choice
and ten belts are included and change out in seconds with no tools required.
The 4" belt
standard machine is built with a slightly lighter frame than the
others and uses hand levers for vice positioning. |
The heavy duty
machine is built with a slightly heavier frame and uses a cross
feed table and hand wheels for vice positioning.
|
The 6" machine
is built with a very heavy frame and also uses a cross feed table
and hand wheels for vice positioning. |
|
|
|
|
|
Ideal
for many applications
|
|
- Hand railing
- Race car
frames and roll cages
- Marine arches
and railings
- Gates and
fences
- Furniture
frames
- Stainless
steel plumbing for restaurant or dairy
- Stainless
steel tube
The AL100 is
the ideal machine for production or short job runs, eliminating
the time consuming and costly process of fitting and finishing pipe
and tube joints.
|
- Two axis
precision crossfeed table with operator handle wheels.
- Heavy duty
frame and base construction.
- Mandrel centerline
adjustment.
- One vise
holds all pipe and tube sizes.
- Top-mounted
grinding surface.
- Vise graduated
in degrees for easy set up.
- Notches 3/4"
to 3" diameter.
- Choose from
twenty-two mandrel diameters to ensure correct gap-free fit.
- Mandrels
are easily and quickly changed to accommodate your requirements.
- Three mandrels
of your choice shipped with every machine.
- Tool free
belt and mandrel change over.
- Quiet operation
below 80 decibels.
- Smooth operation
with minimal vibration.
- Solid aluminum
drive wheel.
|
Be the first to review this product!
|
|
|
|
Heavy
Duty
|
|
| Belt
Size |
|
4"
x 78-3/4"
|
|
| Motor |
|
4.0
hp
|
|
| Speed |
|
3420
RPM
|
|
| Capacity |
|
3/4"
- 3"
|
|
| Belt
Speed |
|
98.4
fps
|
|
| Weight |
|
517
lbs.
|
|
| Size |
|
59"
L x 47" H x 19" W
|
|
|
|
|
