Software for the
tube & pipe bending professional! Bend-Tech SE consists of several
input interfaces; Including pre-defined Templates, 2D Custom, 3D Custom,
Sketch and an XYZ interface. Bend-Tech SE's sketch interface uses the
state of the art 'go first think second' concept. Quickly draw a side
profile add known dimensions and let Bend-Tech SE do the rest. Bend-Tech
SE creates a two scale dimensioned drawing and a shaded three dimensional
model which can be rotated to any angle. The final step is to allow Bend-Tech
SE to create the flat layout print. The flat layout uses user defined
preferences for dimension styles and locations.
Bend-Tech SE's XYZ interface
uses a grid concept for data input. Define the number of bends, give each
bend a x, y and z location, adjust individual bend CLR's if desired, and
select the next button to automatically create the flay layout. Apex is
used for most bends, however, tangent and perpendicular bend locations can
be used for bends close or equal to 180 degrees.
Feature List:
(100% of EZ-3D functionality plus the following)
Sketch interface
- Parametric Style
easy design input
- Pick points for
dimensional placement
- Dimensions are
horizontal, vertical, linear and angular
- Adjust CLR or bend
allowance for each bend
- Bend allowance
& K-factor available (adjustable for each bend)
Create a scaled
model
- Rotate sections
to create a true 3D part
- Move dimensions
to create a printable document
- Rotate 3D shaded
model to any 3D angle
Create a flat layout
- Create prints of
flat layout, shaded model & title block
- Dimension; start
of bend, end of bend & center of bend, from either direction
- Dimension with
decimals or fractions
- Includes cut length,
bend angles, CLR or inside radius, rotation angle & bend order
XYZ interface
- Limit of 50 bends
per part
- Use apex, tangent
or perpendicular for bend placement (adjustable for each bend)
- Adjust CLR or bend
allowance for each bend
- 3D shaded model
is updated at every key stroke
- Crowning
Other
System Requirement
See a DEMO!
Compare
all 4 Bend Tech Products here!
Bend-Tech
Software is copyrighted by 2020 Software Solutions, Inc.
|
