|
The Model 4 Tube and Pipe Bender bends up to 2" Schedule 40 Pipe, 2-1/2" outside diameter round tubing, solid hot rolled steel to 1-1/2" (38 mm) diameter, flats up to 3" (75 mm) wide x 3/4" (18 mm) thick hot rolled steel. It weighs 170 lbs. with the hydraulic cylinder. All links and frame are precision CNC machined from 3/4" and 1" thick steel. All pins are high strength steel.
Painstakingly designed to last years in a hard working fabrication shop. The hydraulic cylinder for instance, swivels in a solid CNC machined steel block that pivots exactly at the cylinder's center, thereby preventing side loads on the cylinder's bearings and seals. The pusher block employs a swiveling bronze wear block to eliminate cylinder side loading.
The Model 4 employs a 10 ton single acting spring return cylinder with a stroke of 14". It will bend 90 degrees in less than two complete strokes and 180 bends typically require only three to four strokes.
Features and Specs
-
Hydraulic
powered
-
Easy setup
and operation
-
Self locking
ratchet. Prevents material springback.
-
Large radius
degree wheel
-
Quick change
dies
-
High bending
torque over 60,000 in./lbs.
-
Durable heavy
duty steel construction
-
Ships UPS
-
Capacity:
- Round
tubing to 2-1/2" (.120" Wall)
- Round tubing to 2" (.188 DOM)
- Square
tubing to 1-1/2"
- Pipe
up to 2" schedule 40 and 1-1/2" schedule 80
- Flats
up to 3" wide and 3/4" thick
|
